SCHWINN Lavin 25
Factory Spec
| Frame | TJ Lavin inspired Cr-Mo HT/DT/ ST dirt jumping, w/ TT and DT gussets, integrated rotor tabs, SS mounted U-brake pivots, new 6mm plate dropout with 14mm axle slots. |
|---|---|
| Fork | Hi-Ten Unicrown 31.8 blades, w/ Cr-mo 1 1/8" steer tube, new dropouts for 14mm axle |
| Crankset/Chainwheel | Hollow forged steel 3pc 175mm w/ black ED finish w/ steel chainwheel 39T screen printed. |
| Bottom Bracket | 8 spline 145mm axle w/ loose ball BB |
| Pedals | Die cast alloy w/ Cr-Mo spindle, fixed pins. |
| Freewheel | Lida, 1/2 X 1/8 X 14T |
| Chain | KMC Z410 1/2 X 1/8 silver / black |
| Rims | Jalco BX-316 black anodized 48H |
| Tyres | Front 20x1.9 XS Gripper, Rear 20 X 1.95 XS Hucker |
| Front Hub | Steel low flange 48H 14mm axle |
| Rear Hub | Steel low flange 48H 14mm axle |
| Spokes | 14G steel w/ UCP finish |
| Nipples | CP Brass |
| Rear Brake | Tektro 907A U-Brake w/ coil springs and Tektro power booster |
| Brake Levers | Tektro 289A cast aluminum |
| Handlebar | Schwinn 2.0mm thick Hi-ten, 610mm x 95mm x 155mm w/ knurling |
| Stem | XS 4-bolt front load cap alloy 1 1/8 threadless |
| Grips | XS 2-1 Grip black Kraton |
| Headset | VP w /gyro, spring loaded adjuster cap, 5mm spacer |
| Saddle | XS Padded Dirt Jump w/ 8mm rails |
| Seat Post | 25.4 x 300 steel with alloy sleeve clamp |
| Seat Clamp | Alloy w/ XS logo |
| Extras | 1 set of pegs and chain tensioners |
thanks to: http://mrdodgy.blogspot.jp/2005/06/schwinn-lavin-25-2005.html